top of page

KBP-7173A

How to put on the cuff

​

  1. Connect the arm cuff to the monitor by inserting the air plug into the air jack.

  2. Open the cuff.

  3. Insert your left arm through the opening. Pull the cuff until it reaches your upper arm. (Note: the bottom edge of the arm cuff should be 0.79-1.18 inches (2-3cm) above the elbow. The air tube should be on the inside of your arm and aligned with your middle finger.)

  4. Align with artery mark. Make sure that the air tube is positioned on the inside of your arm and wrap the cuff securely, so it can not move around your arm.

  5. Hit START button.

​

In order to have the most accurate measurements, please follow the instructions that came with your unit.

KBP-7173A Cuff

KBP-7173A

How to switch users

 

  1. In the POWER-OFF mode, press the left button. The user number will appear in the screen.

  2. Press it again to switch and select user groups until you get the user you want.

  3. Then press the START-STOP button to turn the unit off. The selction you choose will remain.

​

In order to have the most accurate measurements, please follow the instructions that came with your unit.

KBP-7173A users
KBP-7173A memory

KBP-7173A

How to recall memory

​

  1. In the POWER-OFF mode, press the right button once. The device will display the average value of the blood pressure measurements of the last 2 or 3 times.

  2. Press the right button again, and the latest measured value will be displayed.

  3. Press the right button again and the rest measured values will be displayed one by one.

​

In order to have the most accurate measurements, please follow the instructions that came with your unit.

KBP-7173A

How to set date and time

​

  1. In POWER-OFF mode, press the left button for about 3 seconds to enter the date setting, and the "year" will flash.

  2. Press the right button to adjust the year, and press the left button to confirm the selection.

  3. When the year is set, it will automatically enter the month setting. Press the right button to adjust the month, and press the left button to confirm the selection.

  4. Follow the same steps to adjust the date/hour/minute.

​

In order to have the most accurate measurements, please follow the instructions that came with your unit.

KBP-7173A D&T

Hypertension is a dangerous disease that can affect the quality of life. It can lead to a lot of problems including heart failure, kidney failure, and cerebral hemorrhaging. By maintaining a healthy lifestyle and visiting your physician on a regular basis, hypertension and relative diseases are much easier to control when diagnosed in their early stages.

display-BPM-readings.png

Note: Do not be alarmed if an abnormal reading occurs. A better indication of an individual's blood pressure occurs after 2-3 readings are taken at the same time each day over an extended period of time. Consult your physician if test results remain abnormal.

chart-BPM-readings.png
BLOOD PRESURE STAGES CHART.

KBP-7173A

Understanding readings

​

The Konquest™ KBP-7173A is equipped with a classification indicator based on established guidelines from the World Health Organization (WHO). The chart below (color coded on monitor unit) indicates test results.

Screen Shot 2024-01-08 at 9.15.20 PM.png
KBP-7173A readings

KBP-7173A

Troubleshoot

​

​

Screen Shot 2024-01-08 at 9.20.02 PM.png
KBP-7173A trobleshoot

Any question?

bottom of page